Products » CoreLite PET

Recyclable. Cost Effective. Performance.

CoreLite PET - Low-Density PET Foam Core

CoreLite's PET Foam Core: CoreLite PET

CoreLite PET is the next-generation foam core material. It is a cost-effective, closed-cell PET foam specially formulated to provide high mechanical properties. It is a 100% recyclable polymer foam with excellent performance.


Main advantages of CoreLite PET are:

  • Remarkably higher mechanical properties when compared to other PET cores
  • Completely homogenous cell structure.
  • Exceptionally density consistent panel.
  • 100% recyclable material.
  • High temperature resistance and thermoformability.
  • Significant lower cost than other foam cores.


Engineered to meet the physical demands needed in high performance applications, including carrying static and dynamic loads. CoreLite PET can be used as a replacement for PVC foams and Honeycomb. It possesses excellent laminate-to-core bonding adhesion.

Resistance to fatigue is superior, as well as its chemically stability and UV resistance. Water absorption is minimal. Our CoreLite PET can handle processing temperatures up to 150 °C (302 °F).


During high temperature processing it is thermally stable and no outgassing or expansion after post- cure occurs. In the event of fire, no toxic gases are generated.

 
 CoreLite PET Products 
Rigid Sheets
Flexible Sheets
PET Foam Core Kits
 
Finishing Options Finishing Cuts
Coating Single Cut
GroovingDouble Cut
 Perforations Vacuum Infusion Cut
 CoreLite PET Dimensions

Density: from 4.1 to 13.1 Lbs/ft³ (from 65 to 210 Kg/m³)

Width: 48" (1220mm)

Length: 96" (2440mm)

Thicknesses: from 1/8" to 3" (3mm to 76.2mm)
 
 Processing
Adhesive Bonding
Pre-preg (up to 150°C or 302°F)
Contact Molding (hand/spray)
Compression Molding (GMT, SMC)
 Vacuum Infusion
 Thermo-formable
Resin Infusion / injection (VARTM / RTM)
 

*If you have any additional request not mentioned here, please ask us. Most likely we will be able to meet your request.